Dermaplaner

You are here.

The Leaf Razor

Getting Started

Single Edge Razors

Getting Started

Getting started with

Dermaplaner

First, watch the below video (with sound) so you know how to properly load blades (your Dermaplaner does not come with a blade pre-installed, you'll need to load one up to get started).

Watch with Sound On

Review Before Use

- Before using your Dermaplaner, read through these instructions. If you have any questions about how to load, use, or care for the tool, please reach out to us at hello@leafshave.com.

- Exercise caution when handling blades and using Dermaplaner—the blades are sharp, and as with any tool that uses a sharp blade, there is risk of injury.

- Please keep the tool and blades out of reach of children.

- Do not use Leaf Dermaplaner without a blade guard installed.

Getting Started Out of Box

- Your Leaf Dermaplaner comes with two single edge blades and two blade guards.

- One of the blade guards is preinstalled, so you just need to load your first blade and you're ready to go!

- Watch the video below about how to refill blades and blade guards.

- We suggest refilling your Dermaplaner with a new blade and blade guard every one to three uses, or at least once a month. It's important to use fresh, clean blades.

- Between uses, we suggest removing the blade and rinsing it. You can disinfect it if you wish with a quick alcohol wipe.

How to Dermaplane

Before you begin, cleanse your face completely.

Use on either dry skin, or apply a small amount of Leaf Shave Oil. If you’re unsure about which method works best for your skin, we recommend trying both or consulting your dermatologist.

Step 1: Hold your skin taut behind the tool. Place the blade at a 45° angle against your skin.

Step 2: Use light pressure, and move in short, feathery strokes. Start on your cheekbone and move inward along your cheek and jawline.

Step 3: Continue along your forehead, moving downward. Use above your lip and along your chin as desired. Rinse or wipe the blade throughout dermaplaning. Most importantly-take your time.

Step 4: Finish by rinsing your skin and applying Leaf Shave Oil to moisturize and protect your skin.

Watch with Sound On

Care, after use

After you finish using your Dermaplaner, remove the blade, rinse, and dry it. If desired, you can disinfect it with rubbing alcohol. You can reinstall the blade for next use if you're using the same blade next time.

Care, periodically

If your Dermaplaner needs some TLC, we suggest using something like a toothbrush and some dish soap. Scrub a dub-dub.

FAQs

If you ever feel that you're not getting what you need out of your Dermaplaner, please reach out: hello@leafshave.com.